The Keystone Aurora Back Ground Wall Panel decoration method is dry hanging. This method is to first fix the wall with bolts, then slot a piece of stone, fix the stone with a T-shaped frame, and then connect the T-shaped frame to the wall. Bolt together, this kind of marble wall has a certain distance from the wall itself, but it has good fixation. Therefore, if the location of the bathroom is sufficient, this method is the first to stick to the wall.

The second decoration method of Calacatta Aurora Back Ground Wall Panel is wet pasting. First, a layer of steel mesh is laid on the wall, and then concrete wet pasting is used. This method has a better bonding effect, but it is relatively more troublesome.

Calacatta Aurora Back Ground Wall Panel decoration method The third method is also relatively simple, which is to paste directly. Generally divided into point paste and surface paste. The surface pasting method is suitable for thin stone, the thickness is less than 8mm, and the weight is similar to that of wall tiles, and it can be pasted with special mortar. Point pasting is to use special glue for stone, the range of points cannot be greater than 25cm, the amount of points cannot be less than 3-4cm, and the thickness of the glue is more than 0.5cm. This method is used for thicker stones. However, the direct pasting method is not suitable for toilets, because the toilets are mostly light-weight walls with large deformation, and the toilets are often wet. Over time, the glue is prone to aging and accidents are prone to occur.

Regarding the Calacatta Aurora Back Ground Wall Panel decoration method, we have made a detailed introduction for you through the above. I hope that the content introduced above can help you all.